Unix; Printing Using The Ieee 802.11B Interface - Gestetner DSc224 Network Manual

UNIX

For UNIX printing information, please visit our web site or consult your author-
ized dealer.

Printing using the IEEE 802.11b Interface

This section describes how to print after installing the optional 802.11b Interface
Kit.
There are two methods of using this machine as a network printer with IEEE
802.11b.
Note
❒ IEEE 802.11b (wireless LAN) is unavailable in some countries, or its use may
be limited.
❖ ❖ ❖ ❖ ad hoc mode (802.11 ad hoc mode/ad hoc mode)
This is the mode for transmitting between each wireless LAN client. You
must make the channels the same for each wireless LAN client to transmit us-
ing this basic transmitting method which does not require an access point.
When using "802.11b ad hoc mode", the SSID must be set. The ad hoc mode
settings can be made from telnet or a Web Browser. See p.100 "Using in Ad
hoc Mode".
8
TCP/IP
UNIX