About Your Projector; Remote Control - Panasonic PT-VW435NE Operating Instructions Manual

About Your Projector

Remote control

(3)
(4)
(5)
(6)
(7)
(8)
*
Center part is <ENTER> Button.
Outer part is <MOUSE CONTROL>
Button.
(1) <STANDBY> Button
Turn the projector off (
(2) Signal Emission indicator
(2)
Light red while a signal is being sent from the
remote control to the projector.
(1)
(3) Remote control signal emitter
(4) <POWER ON> Button
(13)
Turn the projector on (
(12) (5) <AUTO SETUP/CANCEL> Button
Execute the setting of Auto setup in the setting
*
(11)
menu (
Cancel the playing of the memory viewer function
( page 89).
Æ
(6) <MENU> Button
(10)
Open or close the On-Screen Menu (
(7)▲▼◄► (VOL-/+) Buttons, <ENTER> Button
Navigate the MENU display (
z
Adjust the volume level or mute the sound.
z
(8) <L-CLICK> Button
Act as the left mouse button for wireless mouse
operation (
(9) Number Buttons
Act as number buttons. Use these buttons when
setting the remote control codes (
(9)
entering the PIN code numbers (
(10) <R-CLICK> Button
Act as the right mouse button for wireless mouse
operation (
(11) <MOUSE CONTROL> Button
Move a pointer of the projector or a pointer for
wireless mouse operation (
(12) <INFO> Button
Operate the information function (
(13) <IMAGE> Button
Select the image mode (
Note
The remote control can be used as a wireless mouse for
z
your computer.
Before operating the wireless mouse, connect your
z
computer and the projector with a USB cable
( Æ page 37).
When a USB cable is connected to the computer and the
z
projector, turn on the projector first, then the computer.
(8), (10), (11), (15) are available when a USB cable is
z
connected to the computer and the projector.
page 34).
Æ
page 32).
Æ
page 56).
Æ
Æ
page 37).
Æ
page 37).
Æ
page 37).
Æ
page 36).
Æ
page 40).
Æ
page 40).
page 24) or
Æ
page 33).
Æ
page 36).
Æ
19
ENGLISH -