Creating Copy Feature Presets - Xerox WorkCentre 6400V/S User Manual

7. If you want to change the scan order:
a. On the left side of the window under Scan Order, select Show Reading Order.
b. Select either Left to Right or Right to Left.
8. If you want to change the print order:
a. In the middle of the window under Print Order, select Show Reading Order.
b. Select either Left to Right or Right to Left.
9. Press the Save button in the upper-right corner of the window.

Creating Copy Feature Presets

The system administrator can create presets that specify a particular set of values for the following
features:
• Edge Erase
• Image Shift
• Reduce/Enlarge
To create or change the presets:
1. Log in as the system administrator.
2. Press the Machine Status button on the left side of the control panel.
3. Select the Tools tab.
4. In the list on the left side of the tab, select Service Settings.
5. In the list in the right side of the tab, select Copy Service Settings.
6. If you want to create or change the presets for erasing edges of the images:
a. Select Edge Erase Presets.
b. To create a new preset, select Available from the list of presets on the left side of the window,
select Name at the bottom of the window, enter the name of the new preset in the keyboard
window, and then press the Save button.
c. To edit an existing preset, select it from the list of presets on the left side of the window.
d. Make changes to the amount to erase from each edge on each side.
e. Press the Save button in the upper-right corner of the window.
7. If you want to change the presets for shifting the image on the page:
a. Select Image Shift Presets.
b. To edit an existing preset, select it from the list of presets on the left side of the window.
c. Make changes to the amount of vertical and horizontal shift for each side.
d. Select Name in the lower-left corner of the window, enter the name of the new preset in the
keyboard window, and then press the Save button.
e. Press the Save button in the upper-right corner of the window.
8. If you want to create or change the presets for reducing or enlarging images:
a. Select Reduce/Enlarge Presets.
b. To create or change a proportional preset, select Proportional % on the left side of the window,
select the number of the preset, and enter the percentage using the keypad.
WorkCentre 6400 Multifunction Printer
Copying
103
User Guide