1.
Mask Setting
Press Utility→Pass/Fail→Mask Setting to go to the following menu.
Figure 2-86
Figure 2-87
Table 2-54 The Mask setting menu (Page 2/2)
User‟s Guide for DS1000CA Series
Table 2-53 The Mask setting menu (Page 1/2)
Menu
Settings
X Mask
<x div>
Y Mask
<y div>
Create
Mask
Internal
Location
External
When the save as internal memory
Menu
Settings
Save
Load
Imp./Exp.
Comments
Set
horizontal
waveform (0.04div-4.00div).
Set vertical clearance to the waveform
(0.04div-4.00div).
Create a test mask according to the
above clearance.
Set the memory location of the mask
files.
Comments
Store created test mask into internal
memory.
Recall mask setting file from internal
memory.
Go to import/export menu (same as
REF import/export menu.).
RIGOL
clearance
to
the
2-63