RIGOL
Vertical offset back to 0 shortcut key
Turn the
channel and press the
position back to 0 as a shortcut key, this is especially helpful when the trace
position is far out of the screen and want it to get back to the screen center
immediately.
3. Set vertical "Volts/div" by
Rotate
time at the bottom of interface. Besides, the "Volts/div" contains two forms:
"Fine" and "Coarse".
Coarse/Fine Shortcut key
The Coarse/Fine vertical control can be set by simply pressing the vertical
knob.
1-12
knob to change the vertical display position of
to change "Volts/div", the change will be displayed in real
knob to set the vertical display
knob.
User‟s Guide for DS1000CA Series