Rigol DS1302CA User Manual page 81

Internal Memory
Press Storage→Internal to go to the following menu.
Figure 2-70 Table 2-42 The Internal Memory menu
NOTE: To ensure the setups being saved properly, only after the settings are
changed for more than 5 seconds can the user turn off the instrument. The
oscilloscope can store 10 settings permanently and can restore at anytime.
User‟s Guide for DS1000CA Series
Menu Settings
Int_00 (S)
Int_01 (S)
.
Internal
.
Int_09 (N)
Load
Save
Delete File
Comments
Set up the location of files in
internal memory among Int_00 to
Int_09. Thereinto, S in brackets
indicates the location has storage
file, N indicates has not.
Recall waveform files and setup
files from the internal memory
location.
Save waveform files and setup
files to the internal memory
location.
Delete the files
RIGOL
2-53