Rigol DS1302CA User Manual page 31

Knobs Explanations
Use the vertical controls to display signal waveforms by adjusting the vertical
and
1. Using vertical
The vertical
waveforms in all channels (including MATH and REF). The resolution changes
according to the vertical level set. Pressing this knob will clear the channel offset
to zero.
2. Using vertical
The vertical
waveforms in all channels (including MATH and REF). If the Volts/Div is set to
"Coarse", the waveform scales in a 1-2-5 step sequence from 2 mV to 10 V. If the
Volts/Div is set to "Fine", it scales to small steps between the coarse settings.
3. Channels would be adjustable by the vertical
when they are selected.
4. During the vertical positioning, a position message is displayed on the left
bottom of the screen, in the same color as the corresponding channel. The unit
is V (Volts).For instance: POS: 32.4mV Colours of words and channel waveform
are the same, the unit is V.
User‟s Guide for DS1000CA Series
, and setting the input parameters.
knob
control changes the vertical position of signal
knob
control changes the vertical sensitivity of signal
RIGOL
and only
2-3