Rigol DS1302CA User Manual page 135

(Full Bandwidth)
Measurements
Cursor
Auto
Measure
Vertical
A/D converter
Volts/div Range
Offset Range
Analog Bandwidth
Single-shot
Bandwidth
Selectable Analog
Bandwidth Limit
(typical)
Lower Frequency
Limit (AC -3dB)
Rise Time at BNC,
typical
Dynamic range
DC Gain Accuracy
User‟s Guide for DS1000CA Series
>16 averages: ± (1sample interval + 50ppm ×
reading + 0.4 ns)
Manual Voltage difference between cursors (∆V)
Time difference between cursors (∆T)
Reciprocal of ∆T in Hertz (1/∆T)
Track Voltage value for Y-axis waveform
Time value for X-axis waveform
Auto Cursors are visible for Automatic Measurement
Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot,
Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width,
+Duty, -Duty, Delay1→2 , Delay1→2
8-bit resolution, each channel samples simultaneously
1mV/div-10V/div at input BNC
± 40V(205mV/div-10V/div)
± 800mV(1mV/div-200mV/div)
60MHz(DS1062CA)
100MHz(DS1102CA)
200MHz(DS1202CA)
300MHz(DS1302CA)
60MHz(DS1062CA)
100MHz(DS1102CA)
200MHz(DS1202CA)
300MHz(DS1302CA)
20MHz
≤5Hz (at input BNC)
<1.2ns, <1.7ns, <3.5ns, <5.8ns,
On 300MHz, 200MHz, 100MHz, 60MHz respectively
± 5div
1mV/div: ± 8% (Normal or Average acquisition mode)
2mV/div-5mV/div: ± 4% (Normal or Average acquisition
mode)
RIGOL
5-3