To Measure Automatically - Rigol DS1302CA User Manual

To Measure Automatically

The Measure button in the menu area activates the automatic measurement
function. The instruction below shows the powerful measurement function of
DS1000CA series oscilloscopes.
The oscilloscopes provide 20 auto measurements: Vpp, Vmax, Vmin, Vtop, Vbase,
Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time,
Delay1-2 , Delay1-2 , +Width, -Width, +Duty, -Duty (10 voltage and 10 timing
measurements).
Press the Measure button to display the menu of the Automatic Measurements
settings.
Figure 2-104 Table 2-68 The Measure menu
User‟s Guide for DS1000CA Series
Auto Measurement
Figure 2-103 Measure button
Menu Settings
CH1
Source
CH2
Voltage
Time
Clear
Display OFF
All ON
Comments
Select CH1 or CH2 as source channel
for measurement.
Select to measure voltage parameter.
Select to measure time parameter.
Clear measurement result on screen.
Turn off all measurement result.
Turn on al measurement result.
RIGOL
2-75