Pepperl+Fuchs IC-KP2-1HB6-V15B Manual page 63

IC-KP2-1HB6-V15B
Commands
IPC11:
IDC-...-1K:
Type IDC-...-1K tags can be programmed in such a way that they are compatible
with the type ICC-... read only carriers. This programming occupies the first 8
bytes in the tag. The read/write commands can be used to access the remaining
memory.
You must set the tag type '50' in order to program type IDC-...-1K tags. To do this,
transmit the command SX or EX.
The value range contains 7 characters:
the first 3 characters contain the values 0 ... F (hexadecimal code)
■
the last 4 characters contain the values 0 ... 9 (decimal code)
■
You must select the tag type '50' (ICC-...) beforehand in order to read out this
code. If a "read only code" command is executed when the tag type '50' (IDC-...-
1K) is set, the 4-byte read only code for this tag is issued.
<FixLen> = 5
<FixType> = '02' ASCII (30h 32h), the read only code cannot be
changed
'11' ASCII (31h 31h), the read only code can be
overwritten
<FixLen> = 7
The first 3 bytes are hexadecimal (0h ... Fh), the last
4 bytes are decimal (0d ... 9d).
<FixType> = '52' ASCII (35h 32h), the read only code can be
overwritten
<Data> = (Byte 1 to 3): 0x30 ... 0x39; 0x41...0x46
(Byte 4 to 7): 0x30...0x39
63