Table of Contents
Advertisement
IC-KP2-1HB6-V15B
Installation
5.4.2
R/W head
You can connect either an inductive R/W head (125 kHz or 13.56 MHz) or an
inductive R/W head with electromagnetic coupling (UHF with 868 MHz) to the
IDENTControl Compact.
socket at housing
3
Compatible R/W head see chapter 4.1.1.
Connecting the R/W head
Connect the R/W head with compatible connecting cable to the socket on the top
of the enclosure via the M12 connector.
Compatible connecting cables see chapter 4.2.1.
5.4.3
Ground connection
Connect the IDENTControl Compact unit to ground via a screw on the right under
the housing.
Note!
In order to guarantee safe grounding, mount the serrated washer between the
crimp connector and the housing.
Use a ground conductor lead with a cross-section of at least 4 mm
1
Housing
2
Serrated lock washer
3
Crimp connector
4
Lock screw
Connecting the IDENTControl Compact to ground
Screw the ground conductor to the housing with a crimp connector.
read/write head
4
1
2
3
1
4
5
5
2
1
2
+
A
-
B
3
4
2
.
17
Advertisement
Table of Contents
