AMX AutoPatch Epica-128 User Manual page 89

Standard Audio
Applicability Notice
This chapter pertains to the following standard (mono) audio boards.
Epica-256
q FG1028-410 Input board
q FG1028-431 Input, Digital Gain Control board
q FG1028-431 Output board
q FG1028-434 Output, Digital Volume Control board
Epica-128
q FG1028-440 Input board
q FG1028-461 Input, Digital Gain Control board
q FG1028-443 Output board
q FG1028-464 Output, Digital Volume Control board
Each Epica standard audio board fills one slot and has 4 pluggable 3-position
terminal block connectors. Epica-128 enclosures hold a maximum of 8 input and
8 output standard audio boards. Epica-256 enclosures hold a maximum of 16
input and 16 output standard audio boards.
For more information on which boards are available for specific enclosures, see
the Applicability Notice at the beginning of this manual.
3.1 Attaching Wires
When attaching mono audio input and output wires, refer to the sheet labeled
"AutoPatch Epica Connector Guide" that is shipped with each system. The sheet
shows where to attach each wire on the rear of each enclosure (multi-enclosure
systems have an enclosure number sticker on the rear of each enclosure). Follow
the sheet exactly; the system was programmed at the factory to operate only as
indicated on the sheet.
Epica-128 & Epica-256 Boards & Specifications 3-1