AMX AutoPatch Epica-128 User Manual page 124

BCS Command Table
The following table shows the BCS command characters (keys) that can be used
when working with input gain. For a complete list of the BCS command
characters, see the BCS Command Table on page 1-5.
Key Function
C Change
Status
S
Volume
V
(for Status)
VA Volume Absolute
VR Volume Relative
VS+ Volume Increment
VS- Volume Decrement Adjusts input gain of a specified input down a step
Level
L
" " - " " Number
0 9
Input
I
" " Space
: Colon
T Take
X Exit
BCS Response Table
The following table shows BCS response characters, with descriptions and
meanings, that may appear instead of an entered character or number (see
page 1-6). If these characters appear, all or part of the command is not executed.
Response Meaning
Format Error
?
X General Error
E# Error
Warning
W#
* For additional information on Error and Warning responses, note the specific
number and see page A-1.
BCS Serial Control Protocol
Description
Initiates a Change command
Initiates a Status command to verify the input gain status of an
input
Used in Status commands for input gain
Indicates the number following is the input gain adjustment
to a specific decibel level
Indicates the number(s) following is the input gain adjustment
by a specific decibel amount
Adjusts input gain of a specified input up a step
Indicates the number following is the level
Identifies levels, inputs, and decibel values; combine the digits
to form larger numbers
Indicates the number following is an input (source)
Separates numbers in entries containing multiple numbers
Specifies a range of input numbers in entries containing
multiple numbers
Executes a command
Exits, or cancels, the command being entered
Description
Indicates an error in the entry of the command line format
Indicates the system rejected all or part of the command
Indicates an error code number*
Indicates a warning code number*
7-3