System Requirements - AMX AutoPatch Epica-128 User Manual

Managing Configuration Files
8.1 Installing X
Use this software only if you need to customize or change the configuration
information from the original specification.
Even if you already have X
shipped on the same CD as the configuration file. We strongly recommend
uninstalling the old version of X

System Requirements

®
ä Windows 2000 , Windows NT
ä 233 MHz processor
ä Minimum of 128 MB of RAM
ä 20 MB of available hard drive space
ä 800x600 screen resolution (1024x768 is recommended)
ä Serial port and RS-232 null modem cable
If you cannot locate the AMX AutoPatch Software & Documentation CD that
shipped with your system, see Discovering a System on page 8-4.
Connect from the AMX AutoPatch CD:
N
To install X
1. Close all other applications currently running on your PC.
2. Insert the AMX AutoPatch CD into your CD drive to start automatically.
If the CD does not autorun, explore the CD folder and double-click the
Index.html file.
3. Select Software and find X
4. Optional – Select Release Notes to read about the software before
installation.
5. Select Install.
6. Follow the directions in the subsequent dialog boxes.
Note: The newest version of X
file Updater can also be found on the AMX website for updating X
information for new support devices and I/O boards.
8-2
N Connect
N
Connect on your PC, install the newest version that
N
Connect before installing a new version.
®
, or Windows XP Professional
N
Connect.
N
Connect is available at www.amx.com. An INI
Epica-128 & Epica-256 Installation & Setup
®
N
Connect with