AMX AutoPatch Epica-128 User Manual page 23

Introducing the Epica-128 & Epica-256
Power Supplies
Figure 5: Power supplies on an Epica-128
Each power supply on the rear of the enclosure (see Figure 5) has a power
receptacle that will accept all major international standard power sources. Power
cords are included that are compatible with your country's power sources (unless
ordered otherwise). The maximum power specifications are located on each
power receptacle.
Each power supply has two LED indicators: Status and Power. When the system
is successfully powered up, all indicators on all power supplies display a constant
green.
For additional information on the redundant power supplies, see page .
Caution: To avoid system damage, all power switches on an enclosure must be
turned on simultaneously for the enclosure to work properly (see page 6-1).
Fuse Drawers
The fuse drawers are between the power connectors and the power switches (see
Figure 5). Each drawer contains one fuse. For fuse specifications, see page 2-1.
Serial Number
The serial number is normally located on the rear of the enclosure (see Figure 2
on page 1-3).
Before installation, we recommend recording the serial number for each
enclosure in the system in an easily accessible location.
1-6 Epica-128 & Epica-256 Installation & Setup
Power connector
Fuse drawer
LED indicators
Power switch