AMX AutoPatch Epica-128 User Manual page 115

Executing Presets
To define a global preset, route the system to the desired state and enter the
Define Global Preset command below. Replace the "
number.
RR#T (The larger the system, the longer it will take for the "T" to appear.)
To cancel an incorrect or incomplete BCS command, enter "X".
Define Global Preset Examples:
BCS Command
RR21T Defines the current system state as Global Preset 21
Defines the current system state as Global Preset 3
RR3T
RR5X Cancels the incomplete command
To execute a global preset, enter the Execute Global Preset command below.
Replace the "#" with the global preset number.
R#T
Execute Global Preset Examples:
BCS Command
Executes Global Preset 21
R21T
R3T Executes Global Preset 3
R2X Cancels the incomplete command
Note: Status is not invalidated by global presets.
BCS Command Table
The following table shows the BCS command characters (keys) that can be used
when executing global presets. For a complete list of the BCS command
characters, see the BCS Command Table on page 1-5 .
Key Function
Define
RR
Global Preset
Execute
R
Global Preset
" 0 " - " 9 " Number
Take
T
X Exit
5-4
" with the global preset
#
Action
Action
Description
Initiates a Define Global Preset command
Initiates an Execute Global Preset command by indicating that
the number following is a global preset number (also used in the
Execute Local Preset command)
Identifies global preset values; use multiple digits to enter larger
numbers
Executes a command
Exits, or cancels, the command being entered
BCS Serial Control Protocol