Bcs Command Table - AMX AutoPatch Epica-128 User Manual

1.3 BCS Command Table

The table below shows BCS command characters (keys) used to generate control
commands, their functions, and short function descriptions.
Key Function
Initiates a Change (execute switch) command; this must precede the
C Change
level, input, and output specification
Initiates a Disconnect switch command; this must precede the level
Disconnect
D
and input or output specification
Initiates a Status command; this must precede the level and input or
Status
S
output specification
Level Indicates the number(s) following is the level
L
Identifies input, output, preset, level, and decibel values; use multiple
" " - " " Number
0 9
digits to enter larger numbers
Input Indicates the number following is an input (source)
I
Indicates the number(s) following is an output(s) (destination)
O Output
Note: O is the letter O, not the number zero (0)
" " Space Separates numbers in entries containing multiple numbers
: Colon Specifies a range of numbers in entries containing multiple numbers
Take Executes a command
T
X Exit Exits, or cancels, the command being entered
Initiates an Execute Global Preset command by indicating that the
number following it is a global preset number
Execute Preset
R
Also initiates an Execute Local Preset command when it precedes
the level and the local preset character "
P Local Preset Indicates the number(s) following is a local preset number
Define
RR Initiates a Define Global Preset command
Global Preset
Volume
V Used in Status commands for volume and input gain
(for Status)
Indicates the number(s) following is the volume adjustment
VA Volume Absolute
to a specific decibel level
Indicates the number(s) following is the volume adjustment
Volume Relative
VR
by a specific decibel amount
Volume
Adjusts volume of a specified output up a step
VS+
Increment
Volume
VS- Adjusts volume of a specified output down a step
Decrement
VM Volume Mute Applies mute to the volume
Volume Un-mute Removes mute from the volume
VU
BCS Serial Control Protocol
BCS Command Table
Description
P "
1-5