AMX AutoPatch Epica-128 User Manual page 111

BCS Command Table
The following table shows the BCS command characters (keys) that can be used
when verifying switches. For a complete list of the BCS command characters,
see the BCS Command Table on page 1-5.
Key Function
S Status
Level
L
" 0 " - " 9 " Number
I Input
O Output
Take
T
X Exit
BCS Response Table
The following table shows BCS response characters, with descriptions and
meanings, that may appear instead of an entered character or number (see
page 1-6). If these characters appear, all or part of the command is not executed.
Response Meaning
? Format Error
General Error
X
E# Error
W# Warning
* For additional information on Error or Warning responses, note the specific
number and see page A-1.
BCS Serial Control Protocol
Description
Initiates a Status command; this must precede the level and
input or output specification
Indicates the number following is the level
Identifies input, output, and level values; use multiple digits to
enter larger numbers
Indicates the number following is an input (source)
Indicates the number following is an output (destination)
O
is the letter O, not the number zero (0)
Note:
Executes a command
Exits, or cancels, the command being entered
Description
Indicates an error in the entry of the command line format
Indicates the system rejected all or part of the command
Indicates an error code number*
Indicates a warning code number*
4-3