AMX AutoPatch Epica-128 User Manual page 12

Epica Features (continued)
q Vertical interval synchronization of video signals (optional expansion board)
q Standard RS-232 / RS-422 control port
q Board upgrade potential (hot-swappable, featuring tool-free extraction)
q Remote control available with or without digital volume control
q Dual-redundant (hot-swappable) power supply (RPS)
q 32-bit processor with Ethernet (for linking enclosures), LonTalk
RS-232 / RS-422
q High bandwidth-linearity and low crosstalk
q Links for status display devices
Control Features
Epica systems support the following protocols: BCS* (Basic Control Structure)
N
and X Net.
Several control options are available for Epica systems. Multiple control methods
can be used on the same system.
®
q NetLinx or Duet compatible devices
q Remote control panels and single bus controllers
q APControl 3.0 software (free with all systems)
q APWeb (TCP/IP control via an external module)
q Supports AMX AutoPatch's simple BCS serial control protocol
q Supports third-party controllers, such as Crestron
* BCS is sent as ASCII characters through the RS-232 / RS-422 port.
Features and specifications described in this publication are subject to change
without notice.
Epica-128 & Epica-256 Instruction Manual Introduction
Product Notes
®
, and
x