AMX AutoPatch Epica-128 User Manual page 4

Important Safety Information
and Instructions
When using and installing your AMX AutoPatch product, adhere to the following basic safety
precautions. For more information about operating, installing, or servicing your AMX AutoPatch
product, see your product documentation.
ä
Read and understand all instructions before using and installing AMX AutoPatch products.
ä
Use the correct voltage range for your AMX AutoPatch product.
ä
There are no user serviceable parts inside an AMX AutoPatch product; service should only be
done by qualified personnel.
ä
If you see smoke or smell a strange odor coming from your AMX AutoPatch product, turn it
off immediately and call technical support.
ä
For products with multiple power supplies in each unit, make sure all power supplies are
turned on simultaneously.
ä
Use surge protectors and/or AC line conditioners when powering AMX AutoPatch products.
ä
Only use a fuse(s) with the correct fuse rating in your enclosure.
ä
Make sure the power outlet is close to the product and easily accessible.
ä
Make sure the product is on or attached to a stable surface.
ä
Turn off equipment before linking pieces together, unless otherwise specified in that
product's documentation.
ä
For safety and signal integrity, use a grounded external power source and a grounded power
connector.
ä
Turn off and unplug an enclosure before adding or removing boards, unless otherwise
specified in that product's documentation.
ä
To avoid shock or potential ESD (Electrostatic Discharge) damage to equipment, make sure
you are properly grounded before touching components inside an AMX AutoPatch product.
Epica-128 & Epica-256 Instruction Manual Introduction ii