Usb Ports - DFI EC70A-SU-394 User Manual

USB Ports

USB 3
USB 4
COM 3
SATA 2 SATA Power
1
1
DP or HDMI
LINE-out
Realtek ALC888
SATA 3.0
1
JP1
12
1 1 DDR4
JP2
12
1
Battery
JP3 1
SPI Flash
JP4 1
BIOS
1
6
COM 4 VGA
(JP1)
COM4/DIO Pin Select
COM4/DIO Pin Select (JP2)
Mini PCIe PCIe/ (JP3)
SATA Select
Clear CMOS (JP4)
The system board is equipped with four onboard USB 3.0 ports (USB 1-4). USB devices allow
data exchange between your computer and a wide range of simultaneously accessible external
Plug and Play peripherals.
Chapter 2 Hardware Installation
Chapter 5 Ports and Connectors
USB 3.0
USB 1
USB 2
LAN 2 LAN 1
USB 4 USB 2
USB 3 USB 1 DC-in
MIC-in
USB 3.0
USB 3.0
Intel
WGI210AT
DDR4 DDR4 DDR4
Auto PWR ON (JP7)
JP7
Front
Panel
(JP11)
Power
3
COM 2 COM 1
Chapter 5
BIOS Setting
Configure the onboard USB in the Advanced menu ("USB Configuration" submenu) of the
BIOS. Refer to Chapter 7 for more information.
Driver Installation
You may need to install the proper drivers in your operating system to use USB devices. Refer
to Chapter 8 for more information.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
Important:
If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the
+5V_standby power source of your power supply must support ≥1.5A. For 3 or more
USB ports, the +5V_standby power source of your power supply must support ≥2A.
www.dfi.com