Table of Contents
Advertisement
X I/O Ports (System Board)
Graphics Display
2
10
2
10
1
1
1
2
6
1
5
1
2
10
1
9
DDR3L_ SODIMM
1
Rear Panel
HDMI
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.
DVI-I Port
The DVI-I port is used to connect a LCD monitor. This port supports DVI-D signal only. Connect
the display device's cable connector to the DVI-I port. After plugging the cable connector into
the port, gently tighten the cable screws to hold the connector in place.
VGA (Optional)
The VGA port is used for connecting a VGA monitor. Connect the monitor's 15-pin D-shell cable
connector to the VGA port. After you plug the monitor's cable connector into the VGA port, gen-
tly tighten the cable screws to hold the connector in place.
Driver Installation
Install the graphics driver. Please refer to Chapter 4 for more information.
User's Manual | VC230-AL
1
1
1
1
VGA / DVI
HDMI
VGA / DVI
HDMI
USB Ports
1
2
10
2
10
1
1
1
1
2
6
1
5
1
1
1
2
10
1
9
DDR3L_ SODIMM
1
USB 6 (USB 2.0)
USB 7 (USB 2.0)
Front Panel
USB allows data exchange between your computer and a wide range of simultaneously acces-
sible external Plug and Play peripherals. The system board is equipped with multiple USB Type
A ports at the front panel — two USB 3.0 and two USB 2.0 ports — along with four internal USB
2.0 pin-header ports.
Wake-On-USB Keyboard/Mouse
2
10
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
1
9
BIOS Setting
Configure USB devices in the Advanced menu ("USB Configuration" submenu) of the BIOS. Re-
fer to Chapter 7 for more information.
Chapter 2
HARDWARE INSTALLATION
2
10
2
10
1
1
1
2
6
USB 1/2
USB 3/4
(USB 2.0)
1
5
1
2
10
1
USB 1 (USB 3.0)
USB 2 (USB 3.0)
DDR3L_ SODIMM
1
1
1
20
Advertisement
Table of Contents
