Table of Contents
Advertisement
X I/O Ports
Graphics Display
VGA or DP
Front Panel
HDMI
The HDMI port which carries both digital audio and video signals is used to connect a LCD
monitor or digital TV that has the HDMI port.
DisplayPort ++
The DisplayPort (DP) is a digital display interface used to connect a display device such as a
computer monitor. It is used to transmit audio and video simultaneously. The interface, which
is developed by VESA, delivers higher performance features than any other digital interface.
DP++ is supported by the system board for converting to DVI and HDMI signals.
VGA
The VGA port is used for connecting a VGA monitor. Connect the monitor's 15-pin D-shell cable
connector to the VGA port. After you plug the monitor's cable connector into the VGA port, gen-
tly tighten the cable screws to hold the connector in place.
Important:
Please be cautious when inserting an HDMI
cable into the HDMI/DP port. The HDMI
male connector shall align to the left of the
port as illustrated here. The insertion is fairly
effortless and please reframe from forcing
the insertion to prevent damage.
User's Manual | EC700-AL
HDMI/DP
HDMI
DP
USB Ports
10
10
1
N.C.
Key
11
2
12
3
10
1
GND
GND
11
2
12
3
10
9
+Data
+Data
2
1
-Data
-Data
VCC
VCC
1
2
1
1
1
USB 5/6
(USB 2.0)
USB 3.0 Type A
Rear Panel
USB allows data exchange between your computer and a wide range of simultaneously acces-
sible external Plug and Play peripherals. The system board is equipped with multiple USB Type
A ports at the front panel — two USB 3.0 or four USB 3.0 ports — along with two internal USB
2.0 pin-header ports.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
BIOS Setting
Configure USB devices in the Advanced menu ("USB Configuration" submenu) of the BIOS. Re-
fer to Chapter 7 for more information.
Chapter 2
HARDWARE INSTALLATION
1
1
2
6
1
5
1
(4 x LAN, 2 x USB)
(2 x LAN, 4 x USB)
19
Advertisement
Table of Contents
