Table of Contents
Advertisement
Break Event From Suspend and Reload Global Timer Events
These are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything which occurs to a
device which is configured as enabled, even when the system is in a
power saving mode.
When an I/O device wants to gain the attention of the operating system,
it signals this by causing an IRQ to occur. When the operating system
is ready to respond to the request, it interrupts itself and performs the
service.
PNP/PCI Configuration
This section describes configuring the PCI bus system. It covers some
very technical items, and it is strongly recommended that only experi-
enced users make any changes to the default settings.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
PNP OS Installed
This category is used to disable or enable your Plug and Play with your
operating system.
48
ROM PCI/ISA BIOS
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
PCI IDE IRQ Map To
: No
Primary IDE INT#
: Auto
Secondary IDE INT#
: Disabled
Assign IRQ for VGA
↑ ↓ → ←
ESC
: Quit
F1
: Help
PU/PD/+/-
F5
: Old Values
(Shift) F2
F6
: Load Fail-Safe Settings
F7
: Load Optimal Settings
: PCI-Auto
: A
: B
: Enabled
: Select Item
: Modify
: Color
Advertisement
Table of Contents
