Table of Contents
Advertisement
Suspend
When enabled and after the set time of system inactivity, the
Mode
CPU and onboard peripherals will be shut off.
HDD
This is used to define the continuous HDD idle time that
Power
elapses before the HDD enters the power saving mode (mo-
Down
tor off). When enabled and after the set time of system inac-
tivity, the hard disk drive will be powered down while all
other devices remain active.
Throttle Duty Cycle
This category allows you to select the rate of reduction with your exter-
nal system bus clock to save power.
Options
12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, and 87.5%.
Default
62.5%.
VGA Active Monitor
This category allows you to enable or disable the VGA activities that
cause the system to wake up from power saving mode.
Enabled
VGA activities will cause the system to wake up from power
saving mode.
Disabled
VGA activities will cause the system to wake up from power
saving mode.
Soft-Off by PWR-BTTN
This category allows you to select the power-off time with pressing
power button.
Delay 4
This option allows you to power off your system by pressing
Sec.
power button for 4 sec. at least. If you press power button
once with this option, your system will not be powered off and
will be in suspend mode.
Instant-
This option allows you to press power button once and power
Off
off your system instantly.
47
Advertisement
Table of Contents
