Table of Contents
Advertisement
Yes
Select this option when your operating system is Windows 95.
N o
Select this option when your operating system is not Windows
95. (default)
Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically con-
figure all of the boot and Plug and Play compatible devices.
Auto
The system will automatically detect the settings for you. The
categories that follow will not be shown on the PNP/PCI Con-
figuration screen.
This allows you to set the IRQ/DMA (you have assigned your
Manual
add-in card) to Legacy ISA or PCI/ISA PnP. For non-PnP ISA
cards, select Legacy ISA. For PnP ISA or PCI cards, select
PCI/ISA PnP.
Reset Configuration Data
Enabled
The BIOS will reset the configuration data once automatically.
Disabled
The BIOS will not reset the configuration data.
PCI IDE IRQ Map To
This category is used to configure your system to the type of IDE disk
controller in use.
ISA
Designates which ISA slot is installed with an IDE controller
card; that is, if you are using an IDE controller card.
PCI-Auto
The system will scan and determine the PCI slot that is in-
stalled with an IDE controller card.
Primary IDE INT# and Secondary IDE INT#
The Primary and Secondary IDE INT# categories are used to select the
PCI interrupt (A, B, C, or D) that is associated with the connected hard
drives.
49
Advertisement
Table of Contents
