Table of Contents
Advertisement
7. After finishing copy, click "Control Panel" under Setting of Start.
8. Choose "Device Manager" on the top of "System Properties" screen.
9. Choose "View devices by connection" and click on "Plug & Play
BIOS".
10. Click on "PCI BUS" and choose "Remove" on the buttom of the
screen, then click "OK".
11. Windows 95 will display messages when various hardware compo-
nents in the system are recognized. When prompted to install a
driver, select the "Windows Default driver" or appropriate device
drivers from disk.
12. Select "Yes" to restart the system. (Steps 11 and 12 may occur
several times.)
63
Advertisement
Table of Contents
