Features And Specifications - DFI 586ITX User Manual

The 586ITX is equipped with two NS16C550A-compatible serial ports,
an SPP/ECP/EPP parallel port, a shrouded floppy disk header, and two
shrouded PCI IDE headers with bus mastering capabilities that highly
reduce CPU use during disk transfer. This system board is also
equipped with one mini-DIN-6 PS/2 mouse port, one mini-DIN-6 PS/2
keyboard port, two USB ports and one IrDA connector for wireless con-
nectivity between your computer and peripheral devices.
The 586ITX system board is designed to fit into an ATX form factor
case. Using an ATX power supply, you can either shut down your com-
puter by pressing the Power button located on the front bezel of your
computer or by executing the Shut Down command under the Windows
95 operating system.

Features and Specifications

Processor
®
• Intel Pentium processor with MMX™ technology - 166/200/233MHz
®
• Intel Pentium 90/100/120/133/150/166/200MHz
®
• Future Pentium
®
• Cyrix 6x86™ & 6x86L PR150+/PR166+ and M2 series (supported
in future revision)
• AMD-K5™ PR90/PR100/PR120/PR133/PR150/PR166
• AMD-K6™ PR2-166/PR2-200/PR2-233
Chipset
®
• Intel 82430TX PCIset
Cache Memory
• 512KB pipeline burst, direct map write-back cache installed on the
system board
System Memory
• 8MB to 256MB memory
• Two 168-pin DIMM sockets using x64 EDO (60/70ns), fast page
mode (60/70ns), or SDRAM (10/12/13ns), 3.3V
• Four 72-pin SIMM sockets using EDO or fast page mode x32
DRAM, 60/70ns, 5V
6
OverDrive processors