Pnp/Pci Configuration Setup - DFI C586VX User Manual

Hide thumbs

Table Of Contents

Table of Contents

IRQ3-IRQ15 (Wake Up Events in Doze & Standby, and Power

Down & Resume Events)

These are I/O events whose occurrence can prevent the system from

entering a power saving mode or can awaken the system from such a

mode. In effect, the system remains alert for anything which occurs to a

device which is configured as enabled, even when the system is in a

power saving mode.

When an I/O device wants to gain the attention of the operating system,

it signals this by causing an IRQ to occur. When the operating system

is ready to respond to the request, it interrupts itself and performs the

service. When set to Enable, the activity will neither prevent the system

from going into a power saving mode nor awaken it.

PNP/PCI Configuration

This section describes configuring the PCI bus system. It covers some

very technical items and it is strongly recommended that only experi-

enced users make any changes to the default settings.

Resources Controlled By

Reset Configuration Data

ROM PCI/ISA BIOS