Load Fail-Safe Settings; Load Optimal Settings - DFI 586ITX User Manual

Assign IRQ for VGA
If Enabled, the system will automatically set an IRQ for the VGA card
installed. Your VGA card will need an IRQ address only when using the
video capture function of the card. If you are not using this function and
a new device requires an IRQ address, you can set this function to
Disabled. The IRQ address (previously occupied by the VGA card) will
be available for your new device.

Load Fail-Safe Settings

The " Load Fail-Safe Settings" option loads the troubleshooting default
values permanently stored in the ROM chips. These settings are not
optimal and turn off all high performance features. You should use
these values only if you have hardware problems. Highlight this option
on the main menu and press <Enter>. The message below will appear.
Load Fail-Safe Settings (Y/N)? N
If you want to proceed, type <Y> and press <Enter>. The default set-
tings will be loaded.

Load Optimal Settings

The " Load Optimal Settings" option loads optimized settings from the
BIOS ROM. Use the Setup default values as standard values for your
system.
Highlight this option on the main menu and press <Enter>. The mes-
sage below will appear.
Load Optimal Settings (Y/N)? N
Type <Y> and press <Enter> to load the Setup default values.
50