Table of Contents
Advertisement
PNP/PCI Configuration
This section describes configuring the PCI bus system. It covers some
very technical items and it is strongly recommended that only experi-
enced users should make any changes to the default settings.
Resources Control By
Reset Configuration Data
Resources Controlled By
Auto
The system will automatically detect the settings for you. The
categories that follow will not be shown on the PNP/PCI Con-
figuration screen.
Manual
This allows you to set the IRQ/DMA (you have assigned your
add-in card) to Legacy ISA or PCI/ISA PnP. For non-PnP ISA
cards, select Legacy ISA. For PnP ISA or PCI cards, select
PCI/ISA PnP.
Reset Configuration Data
Enabled
The BIOS will reset the configuration data once automatically.
Disabled
The BIOS will not reset the configuration data.
PCI IRQ Active By
This category is used to set the method by which the PCI bus recog-
nizes that an IRQ service is being requested by a device. Under all
circumstances, you should retain the default configuration unless a dif-
ferent setting is needed.
34
ROM PCI/ISA BIOS
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
:Auto
PCI IRQ Active By
PCI IDE IRQ Map To
:Disabled
Primary
IDE INT#
Secondary IDE INT#
↑ ↓ → ←
ESC
:Quit
F1
:Help
PU/PD/+/-
F5
:Old Values
(Shift) F2
F6
:Load BIOS Defaults
F7
:Load Setup Defaults
:
Level
:
PCI-AUTO
:
A
:
B
:Select Item
:Modify
:Color
Advertisement
Table of Contents
