Ring Mod - Yamaha DM2000 Owner's Manual

316
Appendix A: Parameter Lists
DUAL PITCH
Two input, two output pitch shifter.
Parameter
PITCH 1
FINE 1
LEVEL 1
PAN 1
DELAY 1
FB. G 1
PITCH 2
FINE 2
LEVEL 2
PAN 2
DELAY 2
FB. G 2
MODE
SYNC
NOTE 1
NOTE 2
1.
ROTARY
One input, two output rotary speaker simulator.
Parameter
ROTATE
SPEED
SLOW
FAST
DRIVE
ACCEL
LOW
HIGH

RING MOD.

Two input, two output ring modulator.
Parameter
SOURCE
OSC FREQ
FM FREQ.
FM DEPTH
SYNC
NOTE FM
1.
DM2000—Owner's Manual
Range
–24 to +24 semitones Channel #1 pitch shift
–50 to +50 cents Channel #1 pitch shift fine
Channel #1 level (plus values for normal phase, minus values for
–100 to +100%
reverse phase)
L63 to R63 Channel #1 pan
0.0–1000.0 ms Channel #1 delay time
Channel #1 feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
–24 to +24 semitones Channel #2 pitch shift
–50 to +50 cents Channel #2 pitch shift fine
Channel #2 level (plus values for normal phase, minus values for
–100 to +100%
reverse phase)
L63 to R63 Channel #2 pan
0.0–1000.0 ms Channel #2 delay time
Channel #2 feedback gain (plus values for normal-phase feedback,
–99 to +99%
minus values for reverse-phase feedback)
1–10 Pitch shift precision
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine Channel #1 delay
Used in conjunction with TEMPO to determine Channel #2 delay
1
Range
STOP, START Rotation stop, start
SLOW, FAST Rotation speed (see SLOW and FAST parameters)
0.05–10.00 Hz SLOW rotation speed
0.05–10.00 Hz FAST rotation speed
0–100 Overdrive level
0–10 Acceleration at speed changes
0–100 Low-frequency filter
0–100 High-frequency filter
Range
OSC, SELF Modulation source: oscillator or input signal
0.0–5000.0 Hz Oscillator frequency
0.05–40.00 Hz Oscillator frequency modulation speed
0–100% Oscillator frequency modulation depth
OFF/ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FM FREQ
Description
(Maximum value depends on the tempo setting)
Description
Description