Pdf417 Set Length 2 - Datalogic QuickScan QD24 Series Product Reference Manual

Enter/Exit Programming Mode

PDF417 Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode. Length includes the bar code's check, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters. Characters can be set from 01 to 2,710
characters (pad with zeroes) in increments of 01. Any value greater than 2,710 will be consid-
ered to be 2,710.
See page 243 for detailed instructions on setting this feature.
$CP4L2
Select PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
196
Length 2 is 2,710 Characters
DEFAULT
PDF417 Length Control on page
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
~
QuickScan™ I QD24XX/QBT24XX/QM24XX
194.
representing
CANCEL