Codabar Set Length 1 - Datalogic QuickScan QD24 Series Product Reference Manual

Enter/Exit Programming Mode

Codabar Set Length 1

This feature specifies one of the bar code lengths for
abar Length Control on page
page 243 Mode, or the first fixed length if in
the bar code's start, stop, check and data characters. The length must include at least one data
character. The length can be set from 3 to 50 characters.
Table 13 provides some examples for setting Length 1. See
on setting this feature.
Table 13. Codabar Length 1 Setting Examples
STEP ACTION
Desired Setting (and pad
1
with leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODABAR LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CCBL1
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
148
147. Length 1 is the minimum label length if in
EXAMPLES
03 Characters
'0' and '3'
03 = Length 1 is 3 Characters
DEFAULT
Codabar Length Control on page 147Cod-
Fixed Length on page 243
page 243
09 Characters
'0' and '9'
~
QuickScan™ I QD24XX/QBT24XX/QM24XX
Variable Length on
Mode. Length includes
for detailed instructions
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
Codabar