Msi Set Length 2 - Datalogic QuickScan QD24 Series Product Reference Manual

1D Symbologies

MSI Set Length 2

This feature specifies one of the bar code lengths for
is the maximum label length if in
length if in Fixed Length on page 243
full-ASCII shift characters. The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 22 provides examples for setting Length 2. See
ting this feature.
Table 22. MSI Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT MSI LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CMSL2
Select MSI Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and not save
the entry string. You can then start again at the beginning.
Product Reference Guide
Variable Length on page 243
Mode. Length includes the bar code's check, data, and
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
MSI Length Control on page
Mode, or the second fixed
page 243 for detailed instructions on set-
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
171. Length 2
50 Characters
'5' AND '0'
173