Gs1 Databar™ Expanded Set Length 2 - Datalogic QuickScan QD24 Series Product Reference Manual

Enter/Exit Programming Mode
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the bar code lengths for
on page 160. Length 2 is the maximum label length if in
the second fixed length if in
data characters only. The length can be set from 1 to 74 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 18 provides examples for setting Length 2. See
ting this feature.
Table 18. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
162
Fixed Length on page 243
EXAMPLES
00 (ignore second
length)
'0' and '0'
74 = Length 2 is 74 Characters
DEFAULT
GS1 DataBar™ Expanded Length Control
Variable Length on page 243
Mode. Length includes the bar code's
page 243 for detailed instructions on set-
07 Characters 52 Characters
'0' and '7' '5' and '2'
~
CANCEL
QuickScan™ I QD24XX/QBT24XX/QM24XX
GS1 DataBar™ Expanded
Mode, or
74 Characters
'7' and '4'