Code 93 Set Length 2 - Datalogic QuickScan QD24 Series Product Reference Manual

Enter/Exit Programming Mode

Code 93 Set Length 2

This feature specifies one of the bar code lengths for
Length 2 is the maximum label length if in
fixed length if in Fixed Length on page 243
and full-ASCII shift characters. The length does not include start/stop characters. The length
can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only one fixed
length).
Table 20 provides examples for setting Length 2. See
ting this feature.
Table 20. CODE 93 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC9L2
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and not save
the entry string. You can then start again at the beginning.
168
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Code 93 Length Control on page
Variable Length on page 243
Mode. Length includes the bar code's check, data,
page 243
07 Characters
'0' and '7'
~
QuickScan™ I QD24XX/QBT24XX/QM24XX
Mode, or the second
for detailed instructions on set-
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
Code 93
166.