Code 128 Set Length 1 - Datalogic QuickScan QD24 Series Product Reference Manual

1D Symbologies

Code 128 Set Length 1

Specifies one of the bar code lengths for
minimum label length if in
Fixed Length on page 243
length can be set from 1 to 80 characters.
Table 5 provides some examples for setting Length 1. See
setting this feature.
Table 5. Code 128 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC8L1
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Code 128 Length Control on page
Variable Length on page 243
Mode. Length includes the bar code's data characters only. The
EXAMPLES
01 Character
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Mode, or the first fixed length if in
page 243 for detailed instructions on
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
122. Length 1 is the
80 Characters
'8' AND '0'
123