Microcom 438 Operator's Manual page 29

Getting Started
3.3.10 Printing Preferences - Paper tab
The Paper tab is where the user adds custom form sizes and adjusts minor handling effects.
The form sizes that are created here are added to the Windows Print Server Properties for
the model installed.
3.3.10.1 Paper tab - Rotation
The rotation setting rotates the image being printed. This is used when Portrait or
Landscape is used. The "A" image shows the rotation setting impact.
3.3.10.2 Paper tab - Units
This is used to select the units that the driver uses for most measurements. Some units are
in dots or pixels and should be entered as such.
3.3.10.3 Paper tab - Page Sizes
This is where the user enters forms to the Print Server Properties of the driver. Select the
drop down menu to select standard forms that have been installed with the driver or enter
the size of your form and select the New icon to create a form size that matches your media.
3.3.10.4 Paper tab - Mirror
Selecting this option will cause the image to appear like it being observed in a mirror.
3.3.10.5 Paper tab - Default
This button will cause the driver to load in its default settings for the model driver installed.
Please note that this default may not represent your media type or size.
3.3.11 Printing Preferences - Media tab
The Media tab is used to set specific setting of the media size and operations that in a form
that the printer requires to maintain correct registration.
3-12 438 Operator's Manual - 880052-0103
Chapter 3