Microcom 438 Operator's Manual page 25

Getting Started
Under Devices and Printers, you should see the printer model that was installed. Right click
on the icon and select Printer properties to setup and to change the driver settings.
3.3.3 Printer Properties Page - General tab
This opens the printer properties page. From this screen, Print Test Page may be selected
to generate a test page that is sent to the printer. The test page is printed on the media size
and type that are specified in the driver preferences.
3.3.4 Printer Properties Page - Ports tab
Selecting the Ports tab at the top allows the printer port to be changed if connecting to a
different printer communication port.
3-8 438 Operator's Manual - 880052-0103
Chapter 3