RTV900, WSM
Battery
CAUTION
• When disconnecting the battery cables, disconnect the
negative cable from the battery first. When connecting,
connect the positive cable to the battery first.
1. Disconnect the negative cable (1) from the battery.
2. Disconnect the positive cable (2) from the battery.
(1) Negative Cable
Cargo Bed
1. Lift up the cargo bed (1) by hand and support it so that the
hydraulic cylinder should not drop.
equipped.)
2. Remove the cotter pin and clevis pin (2). (If hydraulic cylinder
equipped.)
3. Disconnect the connector (3) from main harness, then separate
the harness for the tail lamps.
4. Loosen the lock nut (4) and remove the hinge bolt (5) and nut.
(1) Cargo Bed
(2) Clevis Pin
(3) Connector
9-S3
NEW TRANSMISSION
(2) Positive Cable
W1017351
(If hydraulic cylinder
(4) Lock Nut
(5) Hinge Bolt
W1017555
KiSC issued 04, 2006 A