Installing The Display On A Stand; Using Smart Mobile Stands; Using A Third-Party Stand - SMART Board 6075S Installation And Maintenance Manual

Chapter 2
Installing the display
The leftmost display (when viewed from the front) is the first display:
IMPORTANT
Use only standard RS-232 cables. Do not use null modem cables.
NOTE
For more information about using RS-232 cables for remote management, see Appendix B: Managing
the display using RS-232 on page 66.

Installing the display on a stand

If you want to move the display from place to place or if it's not possible to install the display on a wall, you
can install it on a stand.

Using SMART mobile stands

SMART mobile stands are designed for SMART interactive displays. They are height-adjustable. Some
models include integrated speakers, a locking cabinet to secure equipment, and casters that swivel and
lock for easy movement.
For more information about SMART mobile stands, see smarttech.com/accessories.

Using a third-party stand

For information on selecting and using a third-party stand, see
stand.
smarttech.com/kb/171414
Installing your SMART Board 6000S on a
26