10.4
Menu system
10.4.1
Navigating the menu system
Press MENU/YES to display the vertical menu bar
■
Press MENU/YES to confirm selections in menus and dialog boxes
■
Press PWR/NO to exit the menu system
■
Press PWR/NO to cancel selections in menus and dialog boxes
■
Press the navigation pad up/down to move up/down in menus, submenus and di-
■
alog boxes
Press the navigation pad right/left to move right/left in menus and submenus, and
■
to change values in dialog boxes
10.4.2
Meas. mode
10429603;a2
Figure 10.8 Meas. mode dialog box
Figure 10.9 Explanations of the Meas. mode dialog box
Label
Meas. mode
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006
Value
None
■
Spot
■
Area max
■
Area min
■
Area avg
■
Diff spots
■
Explanation
Select None to disable the measurement mode.
■
Select Spot to lay out a spot, where the temper-
■
ature of the spot will be displayed in the result
table.
Select Area max to lay out an area on the
■
screen, where the maximum temperature in the
area will be displayed in the result table. A
measurement marker inside the area will contin-
uously indicate the maximum temperature.
Select Area min to lay out an area on the
■
screen, where the minimum temperature in the
area will be displayed in the result table. A
measurement marker inside the area will contin-
uously indicate the minimum temperature.
Select Area avg to lay out an area on the
■
screen, where the average temperature in the
area will be displayed in the result table.
Select Diff spots to calculate the difference
■
between two spots and display this difference
in the result table.
10 – Camera program
69
10