FLIR ThermaCAM EX320 User Manual page 72

Table of Contents

Advertisement

9 – Camera overview
Callout
5
6
7
9
58
Description of part
Laser LocatIR with lens cap
➲ Please note the following:
A laser icon appears on the screen when the Laser LocatIR is switched on.
Since the distance between the laser beam and the image center will vary by
the target distance, Laser LocatIR should only be used as an aiming aid. Always
check the LCD to make sure the camera captures the desired target.
Do not look directly into the laser beam.
When not in use, the Laser LocatIR should always be protected by the lens
cap.
Focus ring
Lens cap
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006

Advertisement

Table of Contents
loading

Table of Contents