Keypad Buttons & Functions - FLIR ThermaCAM EX320 User Manual

9.2 Keypad buttons & functions
Button
SAVE/FRZ button
SEL button
MENU/YES button
PWR/NO button
Navigation pad
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006
Comments
Briefly press SAVE/FRZ to freeze the current image and display
■
a dialog box where you can choose to save or cancel the image
Press and hold down SAVE/FRZ for more than one second to
■
save the current image without previewing
➲ The image will be saved according to the syntax IRnnnn.jpg where
nnnn is a unique counter. The counter can be reset by pointing to
Factory default on the Setup menu.
➲ Approx. >80 JPG images can be saved.
Press and hold down SEL for more than one second to autoadjust
■
the camera
Briefly press SEL to show current navigation pad focus, i.e. which
■
screen object you can change or move by using the navigation
pad.
Press SEL repeatedly to switch between different screen objects
■
Press MENU/YES to display the vertical menu bar
■
Press MENU/YES to confirm selections in dialog boxes
■
Press MENU/YES to display the graphics if you have previously
■
selected Hide graphics on the vertical menu bar
Press PWR/NO when the camera is switched off to switch on the
■
camera
Press PWR/NO to cancel selections in dialog boxes
■
Press and hold down PWR/NO for more than two seconds to
■
switch off the camera
Press PWR/NO to leave freeze and recall mode
■
Press PWR/NO to display the graphics if you have previously
■
selected Hide graphics on the vertical menu bar.
In menu mode:
Press left/right or up/down to navigate in menus and dialog boxes
■
Press left/right or up/down to change or move a screen object
■
previously selected by using SEL
In manual adjust mode:
Press up/down to change the level (after having selected the
■
scale by pressing SEL)
Press left/right to change the span (after having selected the scale
■
by pressing SEL)
For more information about level and span, see section 10.4.3 –
Manual adjust/Automatic adjust on page 70
9 – Camera overview
9
61