Electrical Power System; Environmental Specifications - FLIR ThermaCAM EX320 User Manual

14 – Technical specifications & dimensional drawings
14.5
Battery type
Battery operating time
Battery charging
AC operation
Voltage
Power management
14.6
Operating temperature range
Storage temperature range
Humidity
Encapsulation
Shock
Vibration
EMC
14
90
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com

Electrical power system

Environmental specifications

Rechargeable Li/Ion battery
1.5 hours. Display shows battery status
Internal, AC adapter, or 12 VDC car adapter.
2-bay desktop charger.
AC adapter, 90–260 VAC, 50/60 Hz, 12 VDC out
11–16 VDC
Automatic shut-down and sleep mode (user-se-
lectable)
For camera type 252:
-15–+45 °C (+5–+113 °F)
For camera type 301:
-15–+50 °C (+5–+122 °F)
The three-digit camera type number is the three
first digits in the camera S/N.
-40–+70 °C (-40–+158 °F)
Operating & storage, 10–95 %, non-condensing,
IEC 359.
IP 54
25 g, IEC 68-2-29
2 g, IEC 68-2-6
The applicable EMC standards depend on the
three-digit camera type number. One or more of
the following standards apply:
EN 61000-6-3:2001
EN 61000-6-2:2001
EN 50081-2 (emission)
EN 50082-2 (immunity)
FCC 47 CFR Part 15 B
The three-digit camera type number is the three
first digits in the camera S/N.
Publ. No. 1558146 Rev. a156 – ENGLISH (EN) – February 28, 2006