Placing The Object To Be Scanned In The Scanner; Model Base - Zimmer Biomet Zfx EvolutionNEXT Manual

Zfx™ EvolutionNEXT
5

Placing the object to be scanned in the scanner

The scanning position depends on the scanning strategy and the holders to be used.

5.1 Model Base

The user should use Blu Tack to place the object to be scanned on the
"Model Base". (Item No.: ZFX02002063)
CAUTION
Before using Blu Tack, read the manufacturer's safety data sheet and the accompanying slip.
The user should ensure that the object to be scanned is positioned
securely so that the position of the object does not change when
individual model segments are removed.
The object to be scanned must not protrude at the front beyond the blue perforated sheet.
Right position
46
Wrong position
The object to be scanned is
positioned too far to the rear
Wrong position
The object to be scanned is
positioned too near to the front