Additional Scan In Scan Step - Zimmer Biomet Zfx EvolutionNEXT Manual

Zfx™ EvolutionNEXT
Adjust size of selection frame – Option 1
Position the mouse pointer on one of the corners and, keeping the
left mouse button
Adjust size of selection frame – Option 2
Position the mouse pointer on one of the four sides and, keeping the
left mouse button
4.5.5.2 Manual correction option for the brightness setting
The brightness setting can still be changed individually by means of the
(below the live image) in order to achieve optimum illumination for the object.

4.5.6 Additional scan in scan step

The Additional Scan function enables the user to interactively
influence the result of a scan step (e.g. jaw model).
The "Additional Scan"
this purpose. An
supplemented by means of one or more additional scans in order to
improve the scan result.
The additional scan area is selected interactively by the user. Whether
an additional scan is necessary depends on the shape of the object
as well as the individual user requirements.
The additional scan is started by clicking the
4.5.6.1 User interface and settings (Additional Scan mode)
3
28
pressed, drag the frame to the required size.
pressed, drag the frame to the required size
dialog box is displayed after each scan step for
"Additional Scan" scan enables missing data to be
Additional Scan
2
1
"Scanner brightness"
button.
Defective areas in the data model
correction slider
1 Data view
2 Camera live image/
Brightness
3 Scan button