Operating Mode - Configuration; Selection Of Additional Restorations - Zimmer Biomet Zfx EvolutionNEXT Manual

Table of Contents

4.4 Operating mode – Configuration

The configurator displays the scan order created in

Zfx Manager 2.0 in the tooth diagram.

The order can still be modified or augmented if necessary.

The Scan Assistant later leads the user through the

necessary scanning steps according to the information

defined here.

Select the tooth, the status of which is to be changed, with

left mouse button

the mouse pointer. Clicking the

opens

the menu to enable the newly required status to be

selected.

"Reset" 1

resets the tooth status.

NOTE

If the tooth status is changed in the configurator, a check should be made to ensure that the change has been

incorporated in Zfx Manager 2.0.

Table of Contents