Toolbar; Orientation Of 3D Data (Views); Data; Delete - Zimmer Biomet Zfx EvolutionNEXT Manual

Zfx™ EvolutionNEXT

3.4 Toolbar

1 Orientation of 3D data (views)

→ see Chapter 3.4.1
2 Selection of 3D data
→ see Chapter 3.4.2

3 Delete

→ see Chapter 3.4.3
4 Undo
→ see Chapter 3.4.4

5 Display of 3D data

→ see Chapter 3.4.5
3.4.1 Orientation of 3D data (views)
View of the scan object
from the front
View of the scan object
from the back
View of the scan object
from the side (left-hand side)
3.4.2 Selection of 3D data
Rectangle
Hold down the Shift key + LMB
to drag out a rectangle
Lasso
Hold down the Shift key + LMB
to define a free-form area
Select all
All 3D data are selected
3.4.3 Delete
Delete selection
Deletes all selected areas
18
View of the scan object
from the side (right-hand side)
View of the scan object
in a bird's-eye view (from above)
View of the scan object
in a worm's-eye view (from below)
Clear selection
All 3D data
are deselected
Invert selection
View of the scan object
in a bird's-eye view (from above)
Coherent selection
All scan areas associated with the selection
are marked
1
2
3
4
5